WORK AREA
• Travel in X longitudinal 600 mm ( 23.6")
• Travel in Y latitudinal 500 mm (19.7")
• Travel in Z vertical 500 mm (19.7")
• Min. clearance spindle nose – table 100 mm (3.9")
• Max. clearance spindle nose – table 600 mm ( 23.6")
TABLE
• Clamping area700 x 520 mm (27.6 x 20.5“)
• T slots: number, width, spacing 5 x 18 x
• Max. table load500 kg (1102.3 lb)
• Distance table – floor 786 mm (30.9")
MILLING SPINDLE
• Speed range50 – 12000 r.p.m.
• Motor power11 kW (S6) (14.7 hp) (S6)
• Torque (Siemens)70 Nm (S6) (51.6 ft/lbs)
• Tool taper DIN69871 ISO 40
• Drive Direct drive
AXES
• Rapid speeds X, Y, Z 24 m/min (944.9 ipm)
• Feed rate X, Y, Z 10 m/min (393.7 ipm)
• Axis acceleration X, Y, Z 2 m/s2 (50.8''/s2)
• Feed force X, Y, Z 5000 N (1124 lbs)
PRECISION
• Positioning accuracy over entire X, Y, Z stroke range ±8 µm
• Positioning repeatability X, Y, Z ±8 µm

TOOL SYSTEM
• Number of tool stations 20
• Tool administration Fixed
• Max. tool diameter (excluding adjacent tools) 80 mm (125 mm) (3.1") (4.9")
• Max. tool length 250 mm (9.8”)
• Max. tool weight 8 kg (17.6 lb)
• Tool changing time (tool/tool) approx. 8.2 s