Ürünler
İleri Seviye Mobil Hidrolik Eğitim Seti - 1
Hydrostatic steering system
Hydrostatic steering is an essential subsystem in many mobile machines and is especially well-suited to managing high steering forces.
The number and design of the components are specifically adapted to the projects in the workbook. This ensures a maximum return on the training with minimum effort.
Hydrostatic steering is an essential subsystem in many mobile machines and is especially well-suited to managing high steering forces.
The number and design of the components are specifically adapted to the projects in the workbook. This ensures a maximum return on the training with minimum effort.
For multiple use
As with all Festo Didactic training packages, so too for mobile hydraulics: all components are designed to be used as parts of a single, compatible system. This means that many parts at basic level can also be used for experiments at advanced levels. Long-term maintenance of the interfaces is also an important part of the design, whether mechanical with Quick-Fix®, hydraulic with low-leakage couplings, or electrical with safety plug technology.
Components and accessories from the equipment set TP 801 are required to carry out the projects.
Safety first!
Safety in the use of our training system is top priority. Many mobile hydraulics elements are not designed to be pressure resistant. This is why our oil return ports use an open coupling system. Students should nonetheless be made fully aware of safety matters. Making sure connections are correct will minimise impact on resources and the environment.
TP 802 – training content
TP 802 promotes the practical testing and technical measurement of the structure and method of operation of a hydrostatic steering system, comprising a steering valve, anti-shock and anti-cavitation valves, steering cylinder(s), constant-displacement pump and (if needed) secondary loads.
The basics include the structure of different steering systems with through-rod and differential cylinders, and determining the displacement and the torque dependencies of the steering unit. In addition, emergency steering characteristics are explored and tested. An overload is applied to the system, its behaviour is analysed and anti-shock valves are set accordingly. The steering system's priority over a secondary load also forms part of this training package.
The media on offer for TP 802
•Workbook for mobile hydraulics TP 800
•Diagnostic system TP 810 with FluidLab®-M
•Designing and simulating with FluidSIM®
•Digital learning program, Hydraulics
•Digital learning program, Electrohydraulics
•Hydraulics poster set
The workstation system
Learnline has a modular design and offers an almost unlimited range of configuration possibilities for the Learnline workstation, such as the table extension for PC-assisted measurement with TP 810 and FluidLab®.
Learnline has a profile surface area of 1400 x 700 mm per side – lots of room for large components and complex circuits.
Quality isn't compromised as its construction and functionality are the very best. The torsionally rigid design and the high-quality coating on the work surface and frame guarantee a long service life despite high loads. Learnline can handle the hard daily lesson routine, as well as a vibrational load during the hydraulic position control.
Recommended accessories
•Hızlı bağlama-çözme bağlantılı hortum hattı
•Hızlı bağlama-çözme bağlantılı hortum hattı
•Hızlı bağlama-çözme bağlantılı hortum hattı
•Amprobe 30XR-A digital multimeter
•4 mm Safety laboratory cables, 106 pieces, red, blue and black
•Hydraulic power pack with LS variable and constant displacement pump combination, three-phase AC
•Montaj çerçevesi için güç kaynağı birimi
•Hidrolik yağ
•Mobile hydraulics TP 800: Workbook
The most important components at a glance
•Steering unit (Orbitrol)
•Shock and anti-cavitation valve
•4/3-way hand lever valve, relieving mid-position (AB −> T), detenting
•Tubing line for unpressurised return
•4-way return header, unpressurised
As with all Festo Didactic training packages, so too for mobile hydraulics: all components are designed to be used as parts of a single, compatible system. This means that many parts at basic level can also be used for experiments at advanced levels. Long-term maintenance of the interfaces is also an important part of the design, whether mechanical with Quick-Fix®, hydraulic with low-leakage couplings, or electrical with safety plug technology.
Components and accessories from the equipment set TP 801 are required to carry out the projects.
Safety first!
Safety in the use of our training system is top priority. Many mobile hydraulics elements are not designed to be pressure resistant. This is why our oil return ports use an open coupling system. Students should nonetheless be made fully aware of safety matters. Making sure connections are correct will minimise impact on resources and the environment.
TP 802 – training content
TP 802 promotes the practical testing and technical measurement of the structure and method of operation of a hydrostatic steering system, comprising a steering valve, anti-shock and anti-cavitation valves, steering cylinder(s), constant-displacement pump and (if needed) secondary loads.
The basics include the structure of different steering systems with through-rod and differential cylinders, and determining the displacement and the torque dependencies of the steering unit. In addition, emergency steering characteristics are explored and tested. An overload is applied to the system, its behaviour is analysed and anti-shock valves are set accordingly. The steering system's priority over a secondary load also forms part of this training package.
The media on offer for TP 802
•Workbook for mobile hydraulics TP 800
•Diagnostic system TP 810 with FluidLab®-M
•Designing and simulating with FluidSIM®
•Digital learning program, Hydraulics
•Digital learning program, Electrohydraulics
•Hydraulics poster set
The workstation system
Learnline has a modular design and offers an almost unlimited range of configuration possibilities for the Learnline workstation, such as the table extension for PC-assisted measurement with TP 810 and FluidLab®.
Learnline has a profile surface area of 1400 x 700 mm per side – lots of room for large components and complex circuits.
Quality isn't compromised as its construction and functionality are the very best. The torsionally rigid design and the high-quality coating on the work surface and frame guarantee a long service life despite high loads. Learnline can handle the hard daily lesson routine, as well as a vibrational load during the hydraulic position control.
Recommended accessories
•Hızlı bağlama-çözme bağlantılı hortum hattı
•Hızlı bağlama-çözme bağlantılı hortum hattı
•Hızlı bağlama-çözme bağlantılı hortum hattı
•Amprobe 30XR-A digital multimeter
•4 mm Safety laboratory cables, 106 pieces, red, blue and black
•Hydraulic power pack with LS variable and constant displacement pump combination, three-phase AC
•Montaj çerçevesi için güç kaynağı birimi
•Hidrolik yağ
•Mobile hydraulics TP 800: Workbook
The most important components at a glance
•Steering unit (Orbitrol)
•Shock and anti-cavitation valve
•4/3-way hand lever valve, relieving mid-position (AB −> T), detenting
•Tubing line for unpressurised return
•4-way return header, unpressurised